Aqua Nature

Microcement | Smooth cement > Working method > Aqua Nature

[vc_row][vc_column width=”1/3″][vc_custom_heading text=”Working methods
CimentArt” font_container=”tag:h3|text_align:left” use_theme_fonts=”yes”][/vc_column][vc_column width=”2/3″][vc_column_text]

Microcement AQUA NATURE CimentArt

[/vc_column_text][vc_column_text]

Essential tools for applications

Protective tape
Scissor or cutter
Sander
Sandpaper grit 40
Sandpaper grit 120 – 150
Spatula
Steel trowel
Microfiber roller
Painting Pan
Electric mixer
Vacuum cleaner
Measuring glass or digital scale

[/vc_column_text][vc_column_text]

Necessary CimenArt products

CimentArt Primer
CimentArt Fiberglass mesh
Microcement AQUA Nature CimentArt
CimentArt sealer
Bi-component Polyurethane varnish CimentArt (Component A and B)

[/vc_column_text][vc_column_text]

Before starting

Check the surface where the product would be apply and make sure the surface is:

Straight
Stable, motionless
Dry and without humidity
Clean
Free of dust, grease, etc.

[/vc_column_text][vc_column_text]

Step-by-step application

Place the protective tape where necessary

For the application over completely smooth walls, do only steps 2, 4, 5 and 6.
In the case of application on floors and walls in bad conditions or with tile joints do all the steps.

1. Extend the Fiberglass mesh CIMENTART over the Surface[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2932″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2928″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]2. Apply a layer of CimentArt Primer with a roller over the fiberglass mesh, or in the case of completely smooth walls apply the layer over the Surface. [/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2934″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2936″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2938″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2940″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][/vc_row_inner][vc_column_text]

Clean the roller and the painting pan with water

[/vc_column_text][vc_column_text]3. Regularization of the surface with AQUA Nature CimentArt

The product is provided ready to be used; we recommend mixing the product using a spatula or electric mixer to obtain a complete homogenization of the color
The coverage is between 1 kg/m2 and 1,5 kg/m2 for a layer of 1mm approx., been always necessary to apply 1 layer minimum. Therefore, between 1 to 1,5 kg of Aqua Nature CimentArt will be required to use the product on a surface of 1 m2

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2954″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]Application of the first layer of Microcement AQUA Nature:

With the steel trowel, using an angle of 45° giving a thickness of 1mm maximun (the thickness is given by the grain of the mixture and by the pressure used during the application)
Complete the first application making it as homogeneous and without irregularities as possible

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2961″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2962″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2963″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2964″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][/vc_row_inner][vc_column_text]

Remove the protective tape before the Microcement Aqua Nature hardens

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2967″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]Allow the Microcement Aqua Nature to dry completely:

The drying time depends on the humidity, temperature, ventilation, etc.
Remove the irregularities of the first layer of Microcement Aqua Nature with a spatula or with sandpaper grit 40
Remove the sanding dust. Wipe the surface with a damp cloth to clean it

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2973″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2974″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]Place protective tape where necessary[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2977″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”2978″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]

If the fiberglass mesh and the tile joints has been completely covered proceed to step 4. If the fiberglass and the joints are still visible, another layer has to be applied in the same fashion
Tip: before and during the application of this layer spray with water and slightly pass the steel trowel to correct the irregularities

[/vc_column_text][vc_column_text]4. Microcement NATURE AQUA CimentArt

The product is provided ready to be used; we recommend mixing it using a spatula or an electric mixer to obtain a complete homogenization of the color. This last layer of AQUA NATURE CimentArt is done with the system fresh over fresh:

Apply AQUA NATURE CimentArt with a thin layer of 0,7 mm, exerting a light pressure with the Steel trowel cover a surface between 1,5 m2 to 2 m2 maximum. Never apply layers thicker than 1 mm.
Immediately apply a second layer over the fresh first layer (do not let the first layer to dry). This application method named fresh over fresh. Slightly spray water during the application of the last layer to achieve a completely smooth finishing using the steel trowel.

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2994″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”3282″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”3283″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]The union between the first and second layer will give a final thickness of 1,5 mm approximately.

Continue with the next 1,5 to 2 m2 in the same fashion, applying one layer followed by a second layer, always with the same system of fresh over fresh.

The coverage of Microcement AQUA Nature for both layers applied with the fresh over fresh system is approximately 1,5 kg/m2, applying the product with a thickness of 1,5mm maximum.

After the both layers applied with the fresh over fresh system are dry, we recommend sanding it with sandpaper grit 80-120 and always vacuuming well the sanding dust.

On this last layer, never use a damp cloth to remove the dust.

The imperfections and/or trowel marks that remain on the surface when sanded will produce on the CimentArt Nature a kind of aesthetic grains and light stains, similar to natural polished cement.[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”3284″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]

Remove the protective tape before the Microcement hardens and allow the second layer of Microcement AQUA NATURE to dry.
The drying time depends on the humidity, temperature, ventilation, etc.

Sand really well with sandpaper grit 80 or 100 the second layer of Microcement Aqua Nature, correcting any irregularities, until a completely smooth surface is achieve
Remove the sanding dust with the help of a vacuum. In addition, you can wipe the surface with a damp cloth to clean it

Place the protective tape where necessary

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”2978″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]Pour into a painting pan the CimentArt Sealer and apply a uniform layer with a shorthaired roller or a microfiber roller

The coverage of the CimentArt sealer is of 100 gr/m2. To use it on a surface of 10 m2 is necessary 1 kg of the product

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”3011″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”3012″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]Clean the roller and the painting pan with water.

Allow the Sealer to dry, the drying time depends on the humidity, temperature, ventilation, etc. Often dries fast.

[/vc_column_text][vc_column_text]6. Bi-Componente water base polyurethane varnish CimentArt

Bi-Componente water base

Recommended for: Indoors and outdoors applications, in every wall, ceiling, floor of moderate traffic.

Preparation:

Mix 5 parts of the Cimentart Base Aqua Varnish Polyurethane component A with 1 part of the component B
To make 1 kg of varnish with the two components 840 gr of component A and 160 gr of component B are need it
The approximate coverage is of 50 gr/ 1m2, applying a thin layer of 0,1mm. Is always necessary to apply two layers. To complete a surface of 10 m2 with two layers approximately 1 kg of the mixture is necessary

Varnish HARD Polyurethane bi-component CimentArt Solvent

Recommended for: indoors and outdoors applications on floors of intense traffic.

Preparation:

Mix 2 parts of the Component A of the Polyurethane Varnish HARD CIMENTART Solvent Base with 1 part of component B.
To make 1 kg of Vanish HARD with the two components 666 gr of component A and 333 gr of component B are necessary
The approximate coverage is of 100 gr/1m2, applying a thin layer of 0, 1 mm. it is always necessary to apply 2 layers. To complete a surface of 10 m2 with one layer 1kg of the mixture is necessary

[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][vc_single_image image=”3017″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][vc_single_image image=”3018″ img_size=”” style=”vc_box_rounded”][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_column_text]

Using a microfiber roller or a spray apply a first layer of varnish, 0,1mm of thickness (tipping off the surface when using the roller) and let dry at least 12 hrs
Using microfiber roller or a spray apply the second layer in the same fashion of the first one
A third layer can be apply for more protection, mainly on those areas exposed to water like showers or outdoor terraces
Do not forget to clean the roller and the painting pan with water or a solvent, depending of the varnish used

[/vc_column_text][vc_column_text css=””]

Important

Microconcrete AQUA can be use on any Surface with the exception of those surfaces that have capillary humidity, pools, basements and factories with heavy machines traffic
Never use Microcement Base Aqua with layers over 1mm of thickness
Never use Microconcrete Aqua with layers over 0.5 mm of thickness
On places of high people traffic, like shops, offices, malls, etc., we recommend to apply a third layer of Varnish HARD polyurethane bi-component
Use the Varnish of Polyurethane CIMENTART always with thin layers of 0,1mm.
Make sure all the Microcement surface is cover with the Polyurethane Varnish
The traditional Microcement CIMENTART can be use without any problems on showers and areas constantly exposed to water. However, for this type of surfaces, use AQUA product line, which is ready to use and 100% waterproof as a system if applied by our technical specifications.

[/vc_column_text][vc_column_text]For any technical guidance write to: info@cimentartusa.com[/vc_column_text][stm_spacer height=”25″][/vc_column][/vc_row][vc_row][vc_column][stm_spacer height=”30″][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]